Tech

Shaw Modem Flashing Orange? Find The Causes And Ways To Fix

Have you ever had an experience with Shaw Modem Flashing Orange? You will find the solution to the Shaw Modem Flashing Orange problem in this blog. Also, be aware that if your Shaw modem flashes orange, it means your device is automatically updating its firmware. This happens to all Shaw devices.

But, more thought should be given if the orange light continues to flash for more than thirty minutes and you are also having trouble connecting to the internet. In addition, a network outage, frayed cables, device damage, or problems with the modem splitter could be the problems.

What are the Reasons Behind Shaw Modem Flashing Orange?

Network Outage: An additional explanation for an orange light that flashes on a Shaw modem could be a localized service outage. This might be the result of either an emergency brought on by severe weather or planned network maintenance.

Damaged Devices: Your modem will begin to flash orange and be unable to connect to the internet if it is beyond repair or too old. If so, send the modem back to Shaw, and if it’s still covered by warranty, you’ll receive a replacement.

Downloading the firmware is ongoing: Regarding a modem, the network’s operation is managed by the firmware. The firmware should always be updated because Shaw releases firmware updates with improved functionality and security on a regular basis.

Issues Using the Modem Splitter: If your modem is using a splitter a device that splits cable signals it might be the source of the problem and be the reason why the modem is flashing orange. The splitter is used to link various locations in your house to the internet or cable network.

Shaw Modem Flashing Orange: Best Ways to Fix It

Here I will present 6 effective ways to overcome your shaw modem issues:

Way 1: Use a Different Phone Jack

Connect the modem to multiple phone jacks because it is possible that the current jack has a malfunction that will cause your modem to lose its internet connection. The procedures listed below can help you troubleshoot this flashing orange light issue:

First, be sure to see if your home has another phone jack that works well for plugging in your modem.
All you need to do now is locate a different phone jack and move your equipment to it.
You are not obliged to relocate all of your devices after that. To test the Shaw Modem, all you have to do is plug it into the new phone jack.
Next, switch back to the original wall jack and carry on reading if the modem connected to the new phone jack is still having problems with the blinking orange light.
Finally, make sure that every connection is securely locked before relocating your modem. Consequently, it assists you in avoiding any loose connections that could be the cause of this problem.

Way 2: Power Cycle the Device

This procedure assists in restarting all of your network device’s software services and resetting the hardware. The detailed instructions for power cycling your Shaw modem are provided below:

To turn it off, first make sure you press the power button.
All you need to do now is set the device to stay off the power source for at least five minutes.
Simply plug the modem’s power adapter back into the outlet after that.
Ensure that the modem is turned on by pressing the power button.
After that, simply test the device to see if the problem has been resolved.
Make sure the modem is unplugged for a minimum of five minutes to guarantee a proper discharge.
You stand to gain if the device is left unplugged for an extended period of time because it will cause a more complete discharge.

Way 3: Wait Until Finish the Firmware Upgrade

Your Shaw modem’s flashing orange light indicates that a firmware upgrade is currently taking place. It will be preferable to confirm whether Shaw’s services are currently available online while you wait for the update to be completed. To do this, take the actions listed below:

Make sure to visit Shaw’s official website first.
Just navigate to the “Service Update & Outages” page at this point.
Choose your county next.
After that, be sure to fill in the relevant fields with the necessary location data.
Don’t forget to select “Detect” or “Search.”
Finally, simply go over the outcomes to determine whether any service interruptions or ongoing outages are present.

Way 4: Uninstall and Install the Modem Splitter

Occasionally, a fault may arise with the splitter you are using in your setup. Therefore, all you have to do is temporarily uninstall the splitter by following the guidelines that are provided below:

First, make sure the splitter’s two coaxial cables are unplugged.
Simply unplug the splitter’s cable from the phone jack at this point.
Wait for about 60 seconds after that.
Simply reinstall the splitter after that. This time, though, make sure it’s connected to just one device your Shaw modem, of course—and pay attention to the indicator light.
If the modem’s orange indicator light stops blinking, you should be aware that the secondary device that was previously connected to the splitter may be the source of the issue in your setup.

Way 5: Reconnect the Coax Cable

Your modem may have disconnected because the coaxial cable’s connection became stuck. To reconnect the coaxial cable, take the following actions:

Your Shaw modem’s coaxial cable needs to be disconnected.
The coaxial cable’s other end should be unplugged from the wall outlet.
Put the cable in the corner.
Disconnect the cable and wait for about sixty seconds.
Reattach the coaxial cable to the wall phone jack and the modem’s “Cable IN” port.
To make sure the connection is functioning properly, test it.

Way 6: Factory Reset the Shaw Modem

The final option will return all modem settings to their initial configuration. Make sure you take a backup screenshot of all the important settings before initiating the factory reset. The steps to factory reset your Shaw modem are listed below:

First, confirm that your device is turned on and plugged into a power outlet.
Now just locate and press the pinhole reset button on the back.
After that, press and hold the reset button for roughly 20 seconds using a paper clip or a pen.
The modem must now flash repeatedly to show that the reset process is underway.
Be sure to give the reset a few moments to finish.
Last but not least, after the factory reset has been initiated, keep your distance from the device to prevent any interference that might make the reset fail.

Tips to Keep Your Modem Healthy:

Restarting your modem will occasionally give it a new lease on life. This can maintain it operating smoothly and help clear up small bugs.
Verify that all of your connections are safe and not unduly tight. Although excessive tightening can harm the connectors, loose connections can still cause problems.
Avoid flooding your network with too many devices at once or excessive data usage. It may put stress on your modem and cause issues.

Bottom Line

Maybe you now know the cause of the blinking orange light on your Shaw modem and how to resolve it. Prior to taking any action to address a flashing orange light, you should first wait for the firmware update to complete. On the other hand, take note of the other remedies listed in the article if the blinking persists for a long time. You should get help from customer service if none of the fixes work.